Basement waterproofing

When the water accumulates around the foundation, hydrostatic pressure builds up and causes the basement to leak. Water pushes its way inside through cracks or joints and the pores in concrete. Water penetrates the pores in concrete, dissolves alkalis, and enlarges the pores. As concrete ages, it becomes more and more porous. It attracts water by absorption, and once the pores get wet, they draw in water from the ground below by wicking action (capillary suction). Qaswa chemical is the best basement waterproofing service provider. By contacting Qaswa chemicals, you can get basement waterproofing services.

Basement insulation techniques

Basement waterproofing and preventing water ingress into the basement is one of the most important research tasks in basement construction. It is often considered a professional system. The excavated soil is then filled but is often less dense than the dirt surrounding it. As a result, where it rains, the water will find its way into the dugout and return to the bottom of the structure. 

That’s why weep tiles are introduced.
When the intakes are blocked, the water expands outside the system, causing a hydrostatic load. As the water rises, water enters the floor, and the wall cracks from the bottom or top of the stairs. Qaswa Chemical, the best basement waterproofing company in Lahore that provides all kinds of services, has developed unique treatments for basement waterproofing. Our chemicals react and combine within the concrete matrix to produce a non-soluble crystalline formation which fills and plugs up the capillary tracts and fine shrinkage cracks in the concrete. Contact Vanity Technical services for a free site inspection today.

 

External Waterproofing Procedure

The scum around the facility was uncovered Hiccuping tiles are eliminated, and plant walls are cleaned Small openings are made in the base blocks to remove moisture from the wall. Walls and foundations are hands lined with premium rubber-treated urethane. Dimple Board introduced with steel profiles and a finishing strip New clod slabs with geotextile trough fabric are installed and connected to the appropriate waste ¾ inch of pale rock is inserted over the posts to a depth of at least 1 foot This prevents dirt from getting into the frame. The excavated soil is then laid.

Internal Waterproofing Procedure

Concrete floor 12-14 inches from the foundation wall. Dug a trench to reveal the interior of the sub-base. The weeping tiles are installed and arranged in layers towards the collection pump. ¾ inch of clean gravel is attached to the screws.

Advantages of basement waterproofing

Reduce energy costs

You may have an opportunity to save money on energy bills by waterproofing your basement or unfinished plumbing! By repairing old cut-outs, you can increase energy efficiency by preventing cold air from entering the fall and winter seasons. On the other hand, during the hottest and humid months, when drains and outages in your home bring in a lot of moisture, your ventilation system has to work harder to eliminate hot and humid air. Viscosity contributes positively to the cooling effect!

Increase the space and value of your home

Many people think the basement is little more than an extra stale and smelly room for garbage and a place to get dressed. This is the wrong way to check. From a spatial point of view, the basement represents the entire floor. For many people, this is 1/3 or 1/2 the total area of their home! This is a massive waste of space and certainly not one you’d prefer to devote to drainage, microscopic organisms, and form improvement. Adding solid, usable space to your home will support its value and give you an edge, provided you decide to sell it whenever you want.

Scroll to Top